Fixture plates and soft jaws.
Workholding that shows what the mills can do.
Flat, square, on pattern. Grid plates, sub plates and vise jaw blanks machined here, ready for your setups.

Fixture plate 6 x 6
6061-T6 tooling plate, 1/2 thick. 1/4-20 tapped grid on 1 inch centers with 1/4 reamed dowel holes between. Faces milled flat and parallel.
- 1/4-20 and 1/4 dowel grid, 1 inch
- Flat and parallel within .002
- Edges chamfered, corners radiused
- Clear anodize or as machined

Fixture plate 12 x 12
6061-T6 tooling plate, 3/4 thick. 1/4-20 grid on 1 inch centers, 1/2-13 mounting holes on your table pattern.
- 1/4-20 grid plus 1/2-13 mounts
- Flat and parallel within .003
- Table pattern to your spec
- Clear anodize or as machined

Sub plates and custom plates
Any size to 48 x 24. Aluminum or steel. Your hole pattern, your pallet or table, your locating features.
- 6061-T6, MIC6 cast plate, or 1018 steel
- Zero point and pallet systems
- Dowel and bushing locations
- Drawing review included

Soft jaw blanks, 6 inch vise
Blank jaws for 6 inch machine vises. 6061-T6 or 1018, drilled and counterbored for your vise pattern. Buy a stack and cut them as you go.
- Kurt DX6 and D688 patterns, others on request
- Heights 1.5, 2.0, 2.5, 3.0
- 6061-T6 aluminum or 1018 steel
- Sold singly or in pairs

Soft jaw blanks, 4 inch vise
The same blanks for 4 inch vises and dovetail fixtures.
- Kurt DX4 and others
- Heights 1.25, 1.5, 2.0
- 6061-T6 or 1018
- Sold singly or in pairs

Dovetail and serrated jaws
Hard jaws with a 45 degree dovetail or serrated face for 5-axis and low profile workholding. 4140 pre-hard, black oxide.
- Dovetail or serrated
- 4140 PH, black oxide
- Standard vise patterns
- Matched pairs
Enclosures and brackets.
Laser cut, bent, hardware in, coated.
Configurable sheet metal parts from the 12 kW fiber laser and the press brakes. Pick the size, the material, the hardware and the color.

Enclosure, two piece
A base with a wraparound lid. PEM nuts for the lid screws, cutouts to your drawing or a blank for you to machine.
- 5052 aluminum, 304 stainless or galvanneal steel
- .040 to .125 thick
- Powder coat RAL colors or bare
- Cutouts, vents and silkscreen on request

U chassis and rack panels
U shaped chassis, 19 inch rack panels and sub panels. Flat and square, hardware installed.
- 1U to 4U rack panels
- PEM nuts, studs and standoffs installed
- Black or clear anodize, powder coat
- Laser cut lettering

L and Z brackets
Standard angle brackets in the sizes you use most. Slotted or round holes, deburred edges.
- Leg lengths 1 to 6 inch
- .060 to .250 thick
- Steel zinc plated, stainless passivated, aluminum
- Quantity breaks from 25

U brackets and straps
U channels, straps and clamps cut and formed to your dimensions.
- Any width to 48 inch
- Holes and slots to your pattern
- Zinc, powder coat or bare
- Welded corners on request

Flat panels and plates
Laser cut flat parts with holes, slots and lettering. No bends. Fast.
- Steel, stainless, aluminum, copper
- Up to 1 inch steel, .500 aluminum
- Deburred, tumbled, brushed or coated
- From one piece

Shim packs
Laser cut shims in stainless or steel, .005 to .060, any outline. Sold in graduated packs.
- 300 series stainless or 1008 steel
- .005, .010, .015, .020, .031, .060
- Your outline, slotted or round
- Packs of 10 per thickness
ID plates and UID tags.
Marked, verified, traceable.
Nameplates, data plates and asset tags laser marked to MIL-STD-130 with verified 2D Data Matrix codes. Made in a registered ITAR shop.

UID nameplates
Aluminum or stainless plates with the IUID Data Matrix, human readable text and your logo. Codes verified to the grade the spec calls for.
- MIL-STD-130 compliant marking
- Data Matrix verified per ISO 15415
- .020 to .062 aluminum or stainless
- Adhesive back, rivet holes or weld tabs

Equipment data plates
Serial, model, rating and warning plates for machines, panels and vehicles. Variable data from your spreadsheet.
- Variable serial numbers
- Black anodize with laser marked white text
- Any size to 12 x 12
- Rounded corners, mounting holes

Asset and serial tags
Small tags for inventory, calibration and asset control. Sequential numbers and barcodes.
- Code 128, QR or Data Matrix
- Anodized aluminum or stainless
- Adhesive or mechanical mount
- From 100 pieces

Blank nameplates
Blank anodized plates ready for your own marking. Standard sizes in stock colors.
- Black, clear, red, blue anodize
- Standard sizes 1 x 2 to 4 x 6
- .032 and .062 aluminum
- Packs of 25
Shop hardware and setup kits.
The small parts that keep a shop moving.
Setup and workholding hardware machined and laser cut here. Practical, repeatable, shipped fast.

Vise work stops
Adjustable work stops for machine vises. Hardened pin, knurled lock, mounts to the jaw or the vise body.
- Fits 4 and 6 inch vises
- Steel body, black oxide
- Pin reach 2 to 4 inch
- Singles or sets of two

Step blocks and clamp kits
Step blocks, strap clamps and T nuts for mill tables and fixture plates.
- 1/2-13 and 5/8-11 kits
- Steel, black oxide
- Table slot sizes to spec
- Kits of 12 to 52 pieces

Aluminum setup blocks
Machined 6061 blocks and risers in standard sizes for setups, fixtures and jigs.
- 1 x 2 x 3, 2 x 4 x 6, custom
- Squared within .002
- Tapped holes on request
- Clear anodize

Tool trays and organizers
Laser cut and bent trays for collets, inserts, gauges and tooling. Custom pockets for your tools.
- Aluminum or steel, powder coated
- Custom pocket layouts
- Stackable or drawer sized
- Laser cut labels
How it works.
Standard parts, shop made.
The product line is built on the same machines, programs and inspection as our contract work. Quote any item, or send the drawing for your own version.
01Pick and ask
Every item has a Quote button. Tell us quantity, material and finish. Standard items quote the same day.
02Make it yours
Every product here is a starting point. Send a sketch or a model and we size it, pattern it and finish it to your spec. Same machines, same inspection.
03Repeat orders
Once a part is set up it stays set up. Reorders ship from the program on file with the same traceability as the first lot.
Start here.
Request a Quote.
Send the print. We send back a price, a date, and any DFM notes.
Request a Quote
Send the print or the model. A price, a date and any DFM notes come back.
Start a quote02Opening soonInstant Laser Quote
Upload a flat part, get a manufacturability check and a price online. Leave your email and hear the day it opens.
Get on the list033D Scanning
We scan your part in house and hand back a solid model or an inspection report.
Try the scannerOr call (215) 608-4595, Monday to Friday, 8am to 4pm Eastern. 500 Emlen Way, Telford, PA 18969.