Finishing

The right finish, with the callout to prove it.

Pick the material and what the part has to survive. The selector names the finish and writes the specification line for your print. Below it, the specs we quote to every day, finished in house or through approved suppliers, including Nadcap accredited sources.

Finishing selector.

Pick the material. Pick the need. Copy the callout.

Thirty five combinations, each with the finish we would quote first, the exact line for the print, and the alternates worth a look.

Finishing selectorRev. Nov 2026
Material
What the part needs most
One need at a timeParts often need two things. Pick the one that matters most, read the alternates, then put both on the print if they can coexist (chem film on the pads of an anodized part, for example).
Quote this finish

Specifications.

What we quote to, by finish.

The standards, classes and thicknesses behind each finish, and what to put on the drawing so the quote and the part match.

Who does the finishingMachining, laser cutting, forming and inspection happen in our shop, and so do bead blasting, citric passivation and VL-2 cleaning. Other finishes are sent to approved outside suppliers, and that includes Nadcap accredited finishers. If your print or flow-down requires Nadcap, say so on the RFQ and we route the job to one. You place one order with us. We manage the supplier, the schedule and the certs, and the parts come back through our inspection before they ship.

Anodizing

MIL-PRF-8625AMS 2469MIL-DTL-5541

Sulfuric anodize (Type II) for color and corrosion protection, hard coat (Type III) for wear, and chromate conversion (chem film) when you need conductivity or a paint base with no buildup.

Type II
Clear or dyed, .0002 to .0007 thick, about half as growth. Class 1 clear, Class 2 dyed.
Type III
Hard coat, .001 to .003 thick, half as growth. 60 to 70 Rc equivalent. PTFE seal optional.
Chem film
MIL-DTL-5541 Type II (RoHS). Class 1A for protection, Class 3 for conductivity.
Call out
Type, class, color, thickness, seal, and whether dimensions apply after coating. Mark masked areas.

Plating

ASTM B633ASTM B733MIL-C-26074AMS 2404MIL-DTL-45204ASTM B488

Zinc for steel hardware, electroless and electrolytic nickel for hard uniform protection, gold over nickel for contacts. Tin and silver on copper alloys by request.

Zinc
Clear, yellow or black chromate. .0002 to .0005. ASTM B633, MIL-DTL-16232, ISO 4042.
Nickel
Electroless or electrolytic, .0002 to .002. Uniform on bores and threads. MIL-C-26074, AMS 2404, ASTM B733.
Gold
Over nickel, .00001 to .0001. MIL-DTL-45204, ASTM B488. Contacts and RF.
Call out
Spec, class, thickness, color, masking, and hydrogen embrittlement bake for hardened steel.

Passivation

ASTM A967AMS 2700Citric in house

Nitric or citric passivation for 303, 304, 316 and 17-4 PH. Removes free iron and restores the chromium oxide layer so stainless stays stainless.

Methods
Citric (ASTM A967 Citric 1 to 5) or nitric (AMS 2700 Method 1, Types 1 to 8).
Testing
Water immersion, high humidity or copper sulfate per the spec on request.
Call out
Standard and method. Add electropolish (ASTM B912) if you want bright and smooth.

Black oxide

MIL-DTL-13924AMS 2485ASTM D769

A black conversion coating for ferrous parts. No buildup, mild corrosion resistance from the oil or wax top film, a clean matte look for tooling and indoor hardware.

Classes
Class 1 for alloy and carbon steel. Class 4 for 300 series stainless.
Finish
Oil (standard), wax, or dry for parts that get painted.
Call out
Spec, class, and the supplementary treatment: oil, wax or none.

Powder coating

RAL colors2 to 6 mil

Epoxy, polyester and hybrid thermoset powders. Durable color and corrosion resistance for steel and aluminum enclosures, brackets and panels. RAL color matching.

Thickness
2 to 6 mil typical. Threads and fits are masked or sized for it.
Prep
Blast or chemical pretreatment. Chem film or zinc under powder for exposed service.
Call out
Powder type, RAL number, gloss level, thickness, masked areas and the show surface.

Bead blasting

Glass beadFine or coarseIn house

A uniform matte that hides tool marks and gives anodize or powder an even base. Machine, blast, then finish is the usual flow.

Media
Fine glass bead for cosmetic matte, coarse for texture and paint grip.
Masking
Threads, bores and sealing faces masked on request.
Call out
Media, grade, which surfaces, and what follows it.

VL-2 cleaning

Fusion and nuclearVL-2In house

Program-level cleaning for fusion and advanced nuclear hardware. Parts for fusion program work are cleaned to the VL-2 requirement in our shop before they ship.

Call out
Put VL-2 on the print or the RFQ and we quote the cleaning with the part. Working to a different program cleaning spec? Send it with the RFQ and we will quote to it.

Magnetic permeability testing

Relative permeability316 stainless1.030 limitIn house

We test relative magnetic permeability on finished parts and report the result, for any customer. Most of this work is 316 stainless. Annealed 316 sits near 1.003 to 1.005, but bending, heavy grinding and welding can raise it, so the number on the mill cert is not always the number on the part.

Material
We can source and supply 316 that passes a 1.030 permeability limit.
Call out
Put the permeability limit and the test standard on the print or the RFQ. Tell us which surfaces or features matter most.
How finishing is quotedFinishing is quoted with the part, done in house or by our approved finishing suppliers, and certified to the spec on your print. Tell us the standard, class, color, thickness and masking, or use the selector above and paste the callout. Certificates of conformance ship with the parts on request.